euroquartz limited blacknell lane crewkerne somerset uk ta18 7he tel: +44 1460 230000 fax: +44 1460 230001 email: info@euroquartz.co.uk web: www.euroquartz.co.uk low power consumption oscillators very low current consumption from 14 m a industry-standard 8 pin dil package wide frequency range, from 1hz to 160khz supply voltage from 2.0 volts to 15.0 volts standard cmos output lpo 8 series, model 7 outlines and dimensions 8 pin dual-in-line package description the euroquartz lpo14 series of low power consumption oscillators are ideal parts providing the time base signals for real-time clocks. the oscillators have very low current consumption (as low as 14 m a) and are ideal for battery operated devices such as data logging and portable test equipment. features specification input voltage: +3.3 vdc +5.0vdc +2.0 volts to +7.0 volts is available frequency range: 20khz to 160khz (limited to standard frequencies.) output logic: cmos output voltage cmos high?1?: 2.97v min. 4.0v min. cmos low ?0?: 0.33v max. 0.4v max. calibration tolerance: see table opposite frequency stability: see curve opposite current consumption: 14 m a typical 18 m a typical rise/fall times: 25ns typical, 45ns maximum (measured from 10%vdd to 90%vdd) start-up voltage: 1.60 vdc pin 1 option, tristate: output is high impedance when low duty cycle: 50%5% typical, 50%10% maximum start-up time: 450ms maximum storage temperature: -50 to +100c ageing: 5ppm maximum at 25c khz range oscillators ma current consumption if you require oscillators in the khz frequency range with ma current consumption please see our standard cmos oscillator range. stock holding and custom parts euroquartz maintain a large stock of standard frequency and specification oscillators. if you require custom frequencies and/or specification oscillators, euroquartz will manufacture in-house with short delivery frequency deviation vs temperature current consumption vs supply voltage calibration tolerance euroquartz part number suffix cailbration tolerance at 25c p 10ppm a 25ppm b 50ppm c 100ppm part number generation lpo oscillators part numbers are derived as follows: example: 5lpo8 -c7-32.768k voltage code ?5? = 5 volts ?3? = 3 volts (etc.) package code lpo8 = 8 pin dil calibration tolerance p, a, b or c model code 4 or 7 frequency k = khz, h = hz
|
